Epoxy Shop Primer (1441)

Definition: Epoxy Shop Primer is a two-component, zinc phosphate-containing, epoxy polyamine-based, anti-corrosive primer.

Area of Application: Epoxy Shop Primary Primer can be easily applied to all sheet surfaces. It can be used as a prefabrication primer, especially in automatic or manual grit spraying workshops. Shop Primer adheres easily to light metals and sheet surfaces and has fast protection feature. It does not cause combustion, foaming and deteriorate the weld quality during welding operations. All kinds of air and oven to be applied on it form a smooth surface for dried primers.

Application Tools: Pistole, Brush or Roller

Application Thinner: Solvents with high polar power such as Gemsa rapid thinner, toluene, xylol, etc.

Preparation of the material: Epoxy Shop Primary is mixed until it is homogenized in its own packaging. It is mixed for 3-4 minutes by adding hardener. After the mixture is rested for 5-10 minutes, it starts to be used. Materials should be prepared to be consumed within 1 hour and mixed from time to time during use.

Method of Application: Metal surfaces to be painted should be cleaned from all kinds of oil, rust and dirt, sandblasting should be made for metal surfaces if necessary. Painting should be started within 8 hours at the latest after cleaning, if the time is prolonged, the surface should be sandblasted again as oxidation will start on the sandblasted surface. Concrete and plaster surfaces are cleaned from dust, dirt and old paint residues, washed if necessary, completely dried. Surface cleaned metal or concrete, plaster surfaces are cleaned from dust, dirt and old paint residues with sandpaper or brush, washed if necessary.

Drying Time:

Dust drying: 1-2 minutes    Touch drying : 4-6 minutes.

Assembly drying : 24 hours   Full drying: 7 days.

The drying time may vary depending on the temperature and air circulation of the application medium and the film thickness coefficient.

Storage Type and Duration: 1 year in a cool and dry environment not receiving direct sunlight, sealed packaging (+5°C to +30°C)

Mixing Ratio: 4 parts 1. 1 part 2 with Component (Epoxy Primer) It is used by mixing the component (hardener).

Mixing Life: The mixture should be consumed within 8 hours at 20°C. Do not pour the paint with and without hardener into the paint without hardener.

Safety Warnings: 

(S2) (Keep out of the reach of children.)

(S7) (Store in a closed, cool and ventilated place.)

Hazard Warnings:

(R10/11) (Easily flammable)

(R20/21/22) (Harmful by inhalation in contact with skin if swallowed.)

(R36/38) (Irritant to eyes and skin)

Notes: Temperature of the application surfaces should be above +5°C.