Unisil Plastic (305)

Definition: Acrylic copolymer is an emulsion-based, matt-looking, wipeable, silicone-added water-based topcoat paint that can be applied to inner and outer surfaces.

Properties: It adheres well to all kinds of wall surfaces, is resistant to ultraviolet rays, does not fade and does not cause cracking and flaking.

Area of Application: It is applied on all kinds of wall surfaces in the interior and exterior walls of buildings. It is an interior and exterior wall paint that has superior coating and covering power, dries quickly in brush and roll application, is water based, odourless matt looking and has high breathing ability. It does not swell and crack, does not leave trace and does not turn yellow over time.

Application Tools: Brush, Roller

Method of Application: Both layers are thinned with 25% water and applied with a brush or roller. Surfaces to be applied should be cleaned from all kinds of oils, dirt, loose and raised layers. It should be corrected with Gemsa Acrylic Interior Wall Paste. Fiorelac Transparent Primer should also be used on absorbent surfaces such as Fiore Acrylic Primer and mineral-based plaster to be newly painted on old painted and very dirty surfaces. It should be waited between coats for at least 2-3 hours.

Paintable Area: Depending on the surface on one coat, an area of 7-8 m2 can be painted with 1 kg.

Drying Time 25°C: Touch drying: 30 minutes – Hard Drying: 24 hours

Storage Type and Duration: 1 year in a cool and dry environment not receiving direct sunlight, sealed packaging (+5°C to +30°C)

Safety Warnings: 

(S2) (Keep out of the reach of children.)

(S7) (Store in a closed, cool, and ventilated place.)

(S24/25) (Avoid contact with eyes and skin.)

Notes: Temperature of the application surfaces should be above +5°C.