We are as close as a phone call+90 322 394 37 76
Language
trenarru

Fiore-Grain Textured Exterior Wall Coating (308)

Fiore-Grain Textured Exterior Wall Coating (308)

Definition: Acrylic copolymer is an emulsion-based, textured, thick-grained exterior wall coating material. It adheres very well to surfaces, does not crack and flake, and does not fade. It ensures that the moisture on the wall is expelled with its ability to breathe with its waterproof properties.

Area of Application: Fiore-Grain Textured Exterior Wall Coating is applied to all kinds of concrete, gas concrete, briquette, brick and similar wall surfaces with fine or coarse plaster. As it fills the capillary cracks in the walls, it does not show surface defects, it saves labour.

Application Tools: Coral Roll

Method of Application: Surface for application should be solid, clean and dry. Newly plastered surfaces should be inspected for dryness before application. After the puffed or flaked parts on the old painted surfaces are cleaned and a solid surface, the surface should be primed with Fiore Acrylic Primer. The application should be made using coral roller. For the first coat, the material is applied without thinning the second coat by thinning 10% water. In this way, a thickness of 1-1.5 mmL is obtained.

Area Covered: 1-2 m2 area can be painted with 1 kg depending on the surface on two coats.

Drying Time 25°C: Touch drying: 1 hour – Hard Drying: 24 hours

Storage Type and Duration: 1 year in a cool and dry environment not receiving direct sunlight, sealed packaging (+5°C to +30°C)

Safety Warnings: 

(S2) (Keep out of the reach of children.)

(S7) (Store in a closed, cool and ventilated place.)

(S24/25) (Avoid contact with eyes and skin.)

Notes: Temperature of the application surfaces should be above +5°C.

Package Filling TL / Pieces
BD 250 TL